Tampilkan postingan dengan label counter. Tampilkan semua postingan
Tampilkan postingan dengan label counter. Tampilkan semua postingan

Canon PIXMA iP1000 Waste Ink Counter Reset

| 0 komentar |
Canon PIXMA iP1000
Waste Ink Counter Reset Manual for Service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
Read More..

HOW RESET MAINTENANCE COUNTER ON A DELL W5310N PRINTER

| 0 komentar |
How to Reset the Maintenance Counter on a Dell W5310N Printer ?, The W5310N Dell laser printer for workgroups require periodic maintenance to ensure the quality of the paper and extend the life of the printer. The maintenance is the replacement of several parts can be purchased as a whole in the maintenance kit. The menu of the printer has a counter that indicates the document when operators need to perform maintenance to show "Error 80" code. This should be against the power back on after the printer.

Instructions 

1 Turn off the printer.
2 Press "Check" and "arrow right" buttons simultaneously and hold them.
3 Turn the printer while pressing the buttons.
4 Release the buttons when the test print starts. When the test is completed, the words "Config" appears on the screen.
5 Use the "down arrow" to scroll to "Reset Maintenance Count" and press "Select". The phrase "Reset Maint Cnt = Reset" appear. Press "Check" to reset the counter. The screen returns to the "Maintenance Count Reset Settings" screen.
6 Go to "Settings menu exit" through the "Down Arrow" and press "Select". The printer has been restored and is ready for use.

Tag: How to Reset the Maintenance Counter on a Dell W5310N Printer
Read More..

Reset CANON PG40 PG41 ink counter cartrige

| 0 komentar |

Try this
Dowload

Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset
Read More..

Canon i320 i255 Waste Ink Counter Reset

| 0 komentar |
Step 1 : Manual Temporary
  1. Unplug power and USB.
  2. Open door and hold power button.
  3. Connect power.
  4. Close door, then release power button.
or
Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

step 2 : Software for Permanant
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark “After service mode Pls use software for permanent reset”
Read More..