Feed-guide assembly
1. Remove the following components:
• Top accessory cover.
• Duplex accessory or cover.
• Tray 2 extension door.
• Fuser.
• Formatter cover and cage.
• Top cover.
• Right-side cover.
• Left-side cover.
• High-voltage power supply.
2. Remove five screws (callout 1).
FigureRemove the feed-guide assembly
3. Remove one screw (callout 2).
Figure Remove the feed-guide assembly
4. Remove the feed-guide assembly.
Figure Remove the feed-guide assembly
Reinstall the feed-guide assembly
When you reinstall the feed-guide assembly, make sure that the support foot is correctly positioned on the power supply.
A CAUTION: Make sure that the four rubber belts and plastic rollers on the feed-guide assembly (mounted to the top of the power supply) remain in place. These belts and rollers can easily become dislodged and you might lose them.
Figure Reinstall the feed-guide assembly
0 komentar:
Posting Komentar