Tampilkan postingan dengan label feed. Tampilkan semua postingan
Tampilkan postingan dengan label feed. Tampilkan semua postingan

Removal and replacement Feed guide assembly hp laserjet p 4010 and 4015 series

| 0 komentar |
Feed-guide assembly

1. Remove the following components:
• Top accessory cover.
• Duplex accessory or cover.
• Tray 2 extension door.
• Fuser.
• Formatter cover and cage.
• Top cover.
• Right-side cover.
• Left-side cover.
• High-voltage power supply.
2. Remove five screws (callout 1).

FigureRemove the feed-guide assembly


3. Remove one screw (callout 2).

Figure  Remove the feed-guide assembly


4. Remove the feed-guide assembly.

Figure Remove the feed-guide assembly



Reinstall the feed-guide assembly

When you reinstall the feed-guide assembly, make sure that the support foot is correctly positioned on the power supply.

A CAUTION: Make sure that the four rubber belts and plastic rollers on the feed-guide assembly (mounted to the top of the power supply) remain in place. These belts and rollers can easily become dislodged and you might lose them.

Figure  Reinstall the feed-guide assembly

Read More..

Removal and replacement Laser scanner hp laserjet p 2015 Pickup and feed assemblies Registration assembly

| 0 komentar |
This section covers the major assemblies of the pickup and feed system: the transfer roller and the registration assembly.
Transfer roller
 NOTE: It is important to make sure that the transfer roller needs to be replaced before t-J removing it. Excess handling can cause additional damage.
Open the print-cartridge door and remove the print cartridge.
2. Use needle-nose pliers to release the transfer roller tabs at the end of the roller, near the right side of the printer.
 CAUTION: Do not break the tabs, and do not touch the rollers.


FigureRemoving the transfer roller

3. Lift up the end of the roller near the right side of the printer, and then slide it toward the right side of the printer while pulling it out of the printer.
Read More..